March 16, 2026
Just Unboxed Your Fountain? Here's What To Do Next

Your new fountain is out of the box, and your cat is already giving it a suspicious look. That's normal. A few minutes of setup and a little patience will turn it into your cat's favorite spot for a drink. Here is a simple plan for the first day and the first week.
1. Give every part a quick wash
Before the first fill, rinse the stainless steel bowl, the tray and the spout with warm water and a drop of mild dish soap, then rinse again until no soap smell is left. Cats have sensitive noses, and a faint factory or soap odor can be enough to keep them away.
2. Prepare the filter
Soak the filter in clean water for a few minutes and squeeze it gently to release trapped air and any loose carbon dust. Slide it into place following the arrows or the slot in the tray. A filter that goes in dry can float, gurgle or let the first water look slightly cloudy.
3. Assemble and fill
- Seat the pump firmly at the bottom so the suction feet hold.
- Fit the tray and spout until everything sits level.
- Fill to the max line with fresh, cool water. Running the pump below the minimum line makes it noisy and shortens its life.
4. Pick the right spot
Place the fountain somewhere quiet where your cat already spends time, with a clear view of the room. Keep it away from the litter box and a little apart from the food bowl. An Anti-Splash Silicone Fountain Mat underneath keeps the floor dry while your cat learns to drink from flowing water.
5. Introduce it slowly
Leave the old water bowl nearby for the first few days so your cat is never without water. Some cats walk right up to the stream; others watch from a distance for a day or two. You can help by dipping a finger in the flowing water and letting your cat sniff it, or by dropping a treat on the tray next to the spout. Never push your cat toward it.
6. Listen and adjust
Our pumps run under 25 dB, so you should hear only a soft trickle. If you notice humming or rattling, check that the water is above the minimum line and that the pump is sitting flat. A gurgling sound usually means air is trapped in the filter; lift it out, squeeze it under water and put it back.
7. Set a simple care routine
- Every day: top up the water.
- Every week: empty, rinse and wipe the bowl and pump intake. Stainless steel parts clean in under 5 minutes, and the steel parts can go in the dishwasher.
- Every two weeks: swap in a fresh filter from our replacement filters.
- Monthly: take the pump apart and brush out the impeller. A Fountain Cleaning Brush Kit makes the small parts easy.
When to call the vet
Most cats adjust within a week. If your cat suddenly drinks far more or far less than usual, or stops drinking altogether, contact your veterinarian, since changes in thirst can be an early sign of a health problem.








