March 16, 2026

How To Make The Most Of Your Stainless Steel Cat Fountain

How To Make The Most Of Your Stainless Steel Cat Fountain

Your fountain is up and running and your cat is drinking from it, so the hardest part is behind you. Here are a few easy tips to keep everything working well, the water fresh and your cat coming back again and again.

Putting It Back Together

When your fountain is already set up, you know how simple this is, but a reminder helps when you put it back together after cleaning. It comes apart and reassembles in just a few steps, and you do not need any tools.

To reassemble after cleaning:

  1. Set the pump into the bottom of the basin.
  2. Fit a new filter and sponge over the pump.
  3. Add water until it reaches the maximum marking.
  4. Put the top tray back in place and attach the spout.
  5. Select your mode and you are ready.

Small Habits, Big Payoff

As with anything your cat uses every day, a short cleaning session now and then pays off. Regular cleaning keeps the water tasting good and stops buildup from forming. Stainless steel makes the job much easier than plastic, with no grime hiding in tiny cracks. Most of our fountains clean in under 5 minutes. Putting in a new filter is also the simplest way to keep the water in great shape.

Your weekly care checklist:

  1. Pour out the water and rinse each component. The stainless steel pieces can go in the dishwasher.
  2. Brush the pump quickly to remove fur or residue. A Fountain Cleaning Brush Kit makes this easier.
  3. Fit a fresh filter and sponge from our replacement filters.
  4. Fill with clean water and put everything back together.
  5. In hard water areas, give the pump a short bath in white vinegar mixed with water once every few weeks so deposits do not build up.

Watching the Water Line

This tip is easy, yet easy to forget too. When water runs low, the pump has to strain, and over time that can shorten its life. A quick look is all it needs.

Keeping water levels in check:

  1. Glance at the side viewing window once a day or every other day.
  2. If your fountain has a low-water indicator light and it comes on, refill straight away.
  3. Fill up to the max line but no higher, since overfilling can make water spill over the top tray.

Quieting a Noisy Pump

The fountain is built to be quiet, with a pump that runs under 25 dB, so most of the time you will hardly know it is on. If it starts to sound louder, the cause is usually simple to fix.

Steps for a louder-than-usual fountain:

  1. Start with the water level, because low water is the most common reason for a noisy pump.
  2. If it is still loud after refilling, take out the pump and rinse off any fur or debris.
  3. For stubborn scale, let the pump sit in a mix of white vinegar and water for 10 to 15 minutes, then rinse it with clean water.
  4. Reassemble everything and check that the pump sits completely below the waterline before you turn it back on.

That is really all it takes. Spend a few minutes on it every week and you will enjoy fresh water, a silent pump and a well-hydrated cat. If a part ever needs replacing, you will find what you need in our filters & parts collection.

← Back to Blogs